| • 10" or 12" I-beam (per size of house) chassis
with detachable hitch |
| • Brake and drag axles per house size |
| • 2x6 and 2x8 floor joists (per floor size) with 2x6
or 2x8 outer rail |
| • R-22 fiberglass blanket floor insulation |
| • 5/8" D-2 structural floor decking |
| • 12" tile floor covering in designated areas |
| • Upgrade carpet over upgrade re-bond pad |
| • 2x6 16" O.C. exterior wall framing |
| • 4" lap siding with 5/4" board trim |
| • R-19 fiberglass exterior wall insulation with Kraft
paper vapor barrier |
| • White poly-vinyl, single hung vertical sliding windows
with double glazed, insulated glass and fiberglass screens |
| • Front exterior door: 36" insulated steel, 1/2
glass, in-swing, vinyl clad with wood frame, weather stripping,
threshold and keyed lockset |
| • Rear exterior door: 36" insulated steel, 6 panel
in-swing, vinyl clad, wood frame, weather stripping, threshold
and keyed lockset |
| • 2x3/2x4 16" O.C. and 24" O.C. interior
partition wall framing |
| • 1/2" sheetrock taped, "knock down"
textured and painted sheetrock interior finish throughout
all rooms |
| • All sheetrock corners and joints, including wall/ceiling
corners, shall be taped and textured finished |
| • All sheetrock outside corners finished with round
corner bead |
| • All windows are finished with sheetrock returns with
a post form acrylic sill |
| • 1/2" sheetrock painted in all closets |
| • 1 3/8" four panel, pre-finished white interior
passage and closet doors with upgrade molding |
| • 5/12 pitch engineered hinged roof trusses throughout |
| • 8' flat ceiling throughout with coffers in designated
areas |
| • 30 lbs. per square foot live load rated roof |
| • 16" eave and gable end overhangs |
| • R-28 blown-in cellulose roof insulation with spray-on
sealer vapor barrier |
| • 7/16" O.S.B. roof decking |
| • "Ply Dry" 30 lbs. rated roofing underlayment |
| • Architectural, self-sealing, U.L. Class A rated shingles |
| • Window dormers, front side per print |
| • 5/8" sheetrock with painted "knock down"
texture on ceiling |
| • 100% copper electrical wiring, 14 gauge minimum size |
| • 100 Amp main electrical panel with 100 Amp main breaker |
