| Transport, frames and hitches remain the property
of Magnolia Homes |
| 2x10 16" O.C. floor joists (per floor size)
with double 2x12 outer rail |
| 32 Wide product 12" O.C. |
| 5/8" tongue and groove plywood floor decking |
| Upgrade carpet over upgrade re-bond pad |
| 12" tile floor covering in designated areas |
| 2x6 16" O.C. exterior wall framing |
| 4" triple lap siding with 5/4" board trim. |
| Shutters on front door side |
| R-19 fiberglass exterior wall insulation with Kraft
paper vapor barrier |
| White poly-vinyl, single hung vertical sliding windows
with double glazed, insulated glass and fiberglass screens |
| Front exterior door: 36" insulated steel, half
glass, in-swing, vinyl clad with wood frame, weather stripping,
threshold and keyed lockset |
| Rear exterior door: 36" insulated steel, 6 panel
in-swing, vinyl clad, wood frame, weather stripping, threshold
and keyed lockset |
| 2x4 16" O.C. primary interior partition wall
framing |
| 1/2" sheetrock taped, "knock down"
textured and sheetrock interior finish throughout all rooms |
| All sheetrock corners and joints, including wall/ceiling
corners, shall be taped and textured finished |
| All sheetrock outside corners finished with round
corner bead |
| All windows are finished with sheetrock returns with
a post form acrylic sill |
| 1/2" sheetrock painted in all closets |
| 1 3/8" four panel, pre-finished white interior
passage and closet doors with upgrade molding |
| 5/12 pitch engineered hinged roof trusses throughout |
| 8' flat ceiling throughout with coffers in designated
areas |
| 45 lbs. per square foot live load rated roof |
| 16" eave and gable end overhangs |
| R-34 blown-in cellulose roof insulation with spray-on
sealer vapor barrier |
| 7/16" O.S.B. roof decking |
| "Ply Dry" 30 lbs. rated roofing underlayment |
| Architectural, self-sealing, U.L Class A rated shingles |
| Window dormers with sunburst window accents, front
side per print |
| 5/8" sheetrock with painted "knockdown"
texture on ceiling |
| 100% copper electrical wiring, 12 gauge minimum size |
| 100 Amp main electrical panel with 100 Amp main breakers |